www.tridonic.com
7
Subject to change without notice. Information provided without guarantee.
Data sheet 11/21-LC888-6
LED Driver
Linear fixed output
Motion Sensor
Product description
1.1 Glow wire test
according to EN 60598-1 with increased temperature of 850 °C passed.
1. Standards
IEC 61347-1
IEC 61347-2-11
EN 61347-1
EN 61347-2-11
2. Description
• The schell is made of flame retardant, with fire rating of V-0
• Compared with PIR module, microwave motion sensor is better – more
wide detection range, no dead area, no fresnel lens, no aging problem,
no environment interface
• Strong anti-interference ability – it is not affected by temperature,
humidity, airflow, dust, noise, brightness and other factors.
• Avoid installing metal accessories or shells, metal will block
the microwave and affect the effect.
• The antenna surface should avoid large current circuit coverage,
which may cause interference.
• The photosensitive position should avoid being blocked by
opaque objects, which will change the light intensity.
• The recommended installation distance of the sensor is
greater than 1.5 m.
3. Installation
3.1 Circuit diagram
1
2
3
4
5
6
ON
DIP
white tighted
heat tube
white tighted
heat tube
490
±5
10
±3
20
±3
23
±5
1
3
4
2
1 ... Blank
2 ... Black
3 ... Red
4 ... Yellow
Cable: White UL 20276 3x24AWG black-red-yellow
Heat tube: φ 4.5 UL L = 28 mm
Connector: XH2.5-T 4P white shell with buckle
