manualshive.com logo in svg

Tridonic 87500975, Manual

Share
Download
Tridonic 87500975 Manual Download Page 10

www.tridonic.com

10

Subject to change without notice. Information provided without guarantee.

Data sheet 11/21-LC888-6

LED Driver

Linear fixed output

Ceiling mounted:                         Wall mounted:

h

d

���°

4.4 Motion detection

Influence factors of detection distance:
•  It is related to the speed of the object.
•  It is related to the size of the object (the area of reception and reflection).
•  In the open environment and the environment with walls, the distance  
  difference is related to the reflection of electromagnetic waves in the face  
  of walls.

4.5 Detection sensibility

Optimized for detection of pedestrians with a speed of 0.5 – 1.5 m/s 
corresponds to 1.8 – 5.4 km/h.
Depending on the application and environmental conditions the maximum 
detectable speed of object may vary.

5. Miscellaneous

5.2 Additional information

Additional technical information at www.tridonic.com 

→

 Technical Data

Lifetime declarations are informative and represent no warranty claim.
No warranty if device was opened.

5.1 Disposal of equipment

Return old devices in accordance with the WEEE directive to suitable  
recycling facilities.

h

d

���°

Take 3 m as an example, the detected moving target person is: 
approx. 170 cm high and weighing approx. 65 kg.
In the test room, the module is installed with the antenna facing down and 
the person is moving in the direction of the sensor at a speed of 1 m/s.

A person moved towards the sensor with a speed of 1 m/s during the test in 
the test room. The sensing range at different heights is as follows:

1 2 3 4 5 6

ON

DIP

Location 1

Location 8

Location 7

Location 6

Location 5

Location 4

Location 3

Location 2

Sensing position

Detection radius at 1 m/s moving speed

100 % sensitivity

50 % sensitivity

Location 1

4.0 m

2.0 m

Location 2

3.5 m

2.5 m

Location 3

3.5 m

2.5 m

Location 4

4.0 m

2.5 m

Location 5

4.0 m

2.5 m

Location 6

3.5 m

2.0 m

Location 7

4.0 m

2.5 m

Location 8

4.0 m

2.5 m

Overall sensing range

3.5 m

2.0 m

Application height

Detection diameter at 1 m/s moving speed

100 % sensitivity

50 % sensitivity

0.5 m

5.0 m

2.5 m

1.0 m

6.0 m

3.0 m

1.5 m

7.0 m

4.0 m

2.0 m

8.0 m

5.0 m

2.5 m

8.0 m

5.0 m

3.0 m

8.0 m

5.0 m

3.5 m

7.5 m

4.0 m

4.0 m

7.0 m

3.0 m

5.0 m

6.0 m

2.5 m

5.5 m

5.0 m

2.0 m

6.0 m

4.5 m

2.0 m

6.5 m

4.0 m

2.0 m

Summary of Contents for 87500975











Reviews:

No comments

Brands by name

Popular brands

Load more brands