manualshive.com logo in svg

Tridonic 87500975, Manual

Share
Download
Tridonic 87500975 Manual Download Page 1

www.tridonic.com

1

Subject to change without notice. Information provided without guarantee.

Data sheet 11/21-LC888-6

LED Driver

Linear fixed output

Product description

•  Constant current built-in LED Driver

•  Motion and daylight detection (included in delivery)

•  For luminaires of protection class I and protection class II

•  Temperature protection as per EN 61347-2-13 C5e

•  Selectable fixed output current 350, 300, 250 and 200 mA

•  Max. output power 35 W

•  Up to 87 % efficiency

•  Nominal life-time up to 100,000 h

•  5-year guarantee (conditions at www.tridonic.com)

Housing properties

•  Casing Driver: metal, white

•  Casing sensor: polycarbonat, white

•  Type of protection IP20

Functions
• 

Overload protection

•  Short-circuit protection

•  No-load protection

 

È

Technical data LED Driver

, page 3

Product description LED Driver

, page 4–6

Technical data Motion Sensor

, page 3

Product description Motion Sensor

, page 7–9

 

Driver LC 35W 200-350mA stepDIM lp SNC

essence series non-SELV (stepDIM)

 

LED Driver with sensor (included in delivery)

Summary of Contents for 87500975











Reviews:

No comments

Brands by name

Popular brands

Load more brands