manualshive.com logo in svg

Trident Raider, Installation And Operation Manual

Share
Download
Trident Raider Installation And Operation Manual Download Page 9

9

Raider Installation and Operation Rev. 1.4.2

Thank you for choosing the Trident Micro Systems Raider. This trunking logic controller is
designed by a team of engineers that has their finger on the pulse of today's ever changing radio
industry. The features and functions found in the Raider are there in direct response to the needs
and requests of the user. Trident is driven by 

your

 success.

The Raider offers a Morse Code identifier, Remote Disable Device, a single period airtime logger,
real-time display of system activity and decoding of DCS codes and CTCSS tones. All accounting
data can be downloaded using the XMODEM protocol for error free transmission. This transfer
procedure will copy the accrued airtime onto a computer disk ready for customer invoice
processing. Dual passwords help protect the Raider from unauthorized access.

The Raider simply gives you more 

'bang for your buck'

.

LTR® is a registered trademark of E.F. Johnson Company.
ProComm Plus

® 

 is a registered trademark of Datastorm.

MTR2000 ™ and other Motorola product names are Trademarks of Motorola

INTRODUCTION 

Summary of Contents for Raider































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands