background image

9

If you require spare parts or an engineer contact your
local Service Force Centre by telephoning:

08705 929929

Your call will be routed to the Service Centre
covering your post code area. The addresses of
Tricity Bendix Service Force Centres are detailed on
the following pages.

CUSTOMER CARE

For general enquiries concerning your Tricity Bendix
appliance and for further information on Tricity
Bendix products, contact our Customer Care
Department by letter or telephone as follows:

Customer Care Department
Tricity Bendix
55-77 High Street
Slough
Berks SL1 1DZ
Tel : 08705 950950

TRICITY BENDIX STANDARD GUARANTEE
CONDITIONS

We, Tricity Bendix, undertake that if, within 12
months of the date of the purchase, this Tricity
Bendix appliance or any part thereof is proved to be
defective by any reason only of faulty workmanship
or materials, we will, at our option, repair or replace
the same FREE OF ANY CHARGE for labour,
materials or carriage on condition that:

* The appliance has been correctly installed and

used only on the gas and electricity supply stated
on the rating plate.

* The appliance has been used for normal domestic

purposes only, and in accordance with the
manufacturer's instructions.

* The appliance has not been serviced, maintained,

repaired, taken apart or tampered with by any
person not authorised by us.

* All service work under this guarantee must be

undertaken by a Tricity Bendix Service Force
Centre.

* Any appliance or defective part replaced shall

become the Company's property.

* This guarantee is in addition to your statutory and

other legal rights.

Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside
these hours, in which case a premium will be
charged.

Exclusions

This guarantee does not cover:

* Damage or calls resulting from transportation,

improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.

* Costs incurred for calls to put right an appliance

which is improperly installed or calls to appliance
outside the United Kingdom.

* Appliances found to be in use within a

commercial or similar environment, plus those
which are the subject to rental agreements.

* Products of Tricity Bendix manufacture which are

not marketed by Tricity Bendix.

European Guarantee

If you should move to another country within Europe
then your guarantee moves with you to your new
home subject to the following qualifications:

* The guarantee starts from the date you first

purchased your product.

* The guarantee is for the same period and to the

same extent for labour and parts as exist in the
new contry of use for this brand or range of
products.

* This guarantee relates to you and cannot be

transferred to another user.

* Your new home is within the European

Community (EC) or European Free Trade Area.

* The product is installed and used in accordance

with our instructions and is only used
domestically, i.e. a normal household
The electrical supply complies with the
specification given in the rating label.

* The product is installed taking into account

regulations in your new country.

Before you move, please contact your nearest
Customer Care centre, listed below, to give them
details of your new home. They will then ensure that
the local Service Organisation is aware of your move
and able to look after you and your appliances.

France

Senlis

+33 (0)3 44 62 22 22

Germany

Nürnberg

+49 (0)911 323 2600

Italy

Por39 (0)1678 47053

Sweden

Sto46 (0)20 78 77 50

UK

Slough

+44 (0)1753 219898

Service and Spare Parts

Summary of Contents for TBG 640























Reviews: