background image

8

Something Not Working?

   SYMPTOM

There is no spark when lighting the gas

The gas ring burns unevenly

   SOLUTION

Check that the unit is plugged in and the electrical

supply is switched on

Check that the RCCB has not tripped (if fitted)

Check the mains fuse has not blown

Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

Check the main jet is not blocked and the burner

crown is clear of food particles.

Check the burner cap and crown have been

replaced correctly, e.g. after cleaning.

If the hob is not working correctly, please carry out the following checks before contacting your local Tricity
Bendix Service Force Centre.

IMPORTANT:

 If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or

installation, a charge will be made even if the appliance is under guarantee.

If after all these checks, your hob still does not
operate correctly, contact your local Tricity Bendix
Service Force Centre.

When you contact them, they will need the following
information:
1.  Your name, address and post code.
2.  Your telephone number
3. The model and the serial number (which can be

found on the rating plate)

4.  Clear and concise details of the fault, for example

when does the fault occur and how often.

5.  Date of purchase

Please note that it will be necessary to provide proof
of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the
above checks have been made as the engineer will
make a charge if the fault is not a mechanical or
electrical breakdown.

Summary of Contents for TBG 640























Reviews: