Revision: 0
FlexxPump4 B
User Manual
35
EN-
6.3.7 RUN-Menu
The RUN-Menu is used for manual activation of the FP4 B. A special donation from
FP4 B can be triggered in this way. This function can, for example, be used for the
advantageous "Quick Check" to manually check the condition of the lubrication point.
FP4 B carries out a special donation after triggering the RUN function. After triggering
the RUN function, the FP4 B executes exactly as many strokes per outlet as were set in
the variable number of cycles c in the PRO menu. During the stroke, the back pressure
detected by the integrated microelectronics is displayed in the LCD as an approximate
value in bar.
There is no fault or error at FP4 B.
Remove the activation and programming key from the housing of the FP4 B and
place it on the action area.
Hold the activation and programming key on the action area. The yellow LED lights
up. Leave the activation and programming key on the action area until RUN is display-
ed in the LCD. Remove the activation and programming key from the action area as
long as RUN is displayed in the LCD. The yellow LED disappears.
Ü
The LCD flashes together with the green LED twice. The FP4 B starts to pump the
lubricant to the outlet (special donation or "Quick-Check").
Insert the activation and programming key into the hole provided on the housing of
the FP4 B or repeat the special dispenser ("Quick-Check") if necessary.
Observe the back pressure values displayed on the LCD if they are of interest to
you.
During the dispensing process, the green LED lights up; in addition, the counterpres-
sure for the stroke is displayed in the LCD.
If you use the RUN function in the Emptying-Time-Mode, the Emptying time is re-
duced.
The RUN-Menu can only be reached from the ON mode (FP4 B switched on). When
you have entered the RUN-Menu, you will return to the ON mode.
