TriboServ FlexxPump4 BXXX-EXT, User Manual

Page: 34 / 58

Revision: 0
FlexxPump4 B
User Manual
34 EN-
Changing the operating mode:

If you want to change the operating mode, move the activation and programming
key back to the action area.
Ü
The yellow LED lights up and the LCD displays the currently unselected operating
mode. The yellow LED lights up as long as the activation and programming key is on
the action surface; the two adjustable operating modes run alternately.

When your desired operating mode is displayed on the LCD, remove the activation
and programming key from the action area.
Ü
The yellow LED disappears; the LCD flashes together with the green LED twice. The
selected operating mode has now been accepted.
Not changing the operating mode:

If you do not want to change the operating mode, the activation and programming
key must remain removed from the action area.
Ü
The LCD flashes together with the green LED twice, whereby the operating mode is
displayed in the LCD.

The SET-Menu can only be accessed from the OFF mode (FP4 B is switched off).
When you have entered the SET-Menu, you will return to the OFF mode.
The LCD now displays the currently set value of the cartridge size. Now you have the
possibility to change the value of the used cartridge size.
Changing the used cartridge size:

If you want to change the cartridge size, move the activation and programming key
back to the action area.
Ü
The yellow LED lights up and the LCD displays the currently unselected cartridge
size. The yellow LED lights up as long as the activation and programming key is on the
action surface; the two adjustable cartridge sizes run alternately.

When your desired cartridge size is displayed on the LCD, remove the activation and
programming key from the action area.
Ü
The yellow LED disappears; the LCD flashes together with the green LED twice. The
selected cartridge size has now been accepted.
Not changing the cartridge size:

If you do not want to change the cartridge size, the activation and programming key
must remain removed from the action area.
Ü
The LCD flashes together with the green LED twice, whereby the cartridge size is
displayed in the LCD.

The SET-Menu can only be accessed from the OFF mode (FP4 B is switched off).
When you have entered the SET-Menu, you will return to the OFF mode.

Before commissioning, check that the correct cartridge size is set in the FP4 B
software. The cartridge size used and the cartridge size set in the software must be
identical!