background image

 

 

- 2 - 

CGT 660

C

ontents

1  Safety regulations .......................................................................................4
2  General information ....................................................................................4

2.1  Scope of delivery ..........................................................................4
2.2  Meaning of the symbols used ..........................................................5
2.3  Technical data ...............................................................................5
2.4  Description ...................................................................................6
 

TPS module functions  ....................................................................7

  Station filter .............................................................................7
  Stuffing ...................................................................................7
  Changing service information ....................................................7
  Changing the operator ID (CAT) .................................................7

 

Effective assignment of cable channels with low bandwidths  ..............8

  SelecPlex

®

  ..............................................................................8

3  Installation ..................................................................................................8

3.1  Retrofitting a CA module ................................................................9
3.2  Installing the COFDM-QAM module ...............................................10
3.3  Connecting the COFDM-QAM module ...........................................11

4  The control panel at a glance .....................................................................12

4.1  Menu items .................................................................................12
4.2  Functions of the control panel buttons .............................................12

5  Programming ............................................................................................13

5.1  Preparation .................................................................................13
5.2  Notes on level setting ...................................................................13
5.3  Programming procedure ...............................................................14
5.4  Programming the COFDM-QAM module ........................................16
 

Selecting the module / channel strip ..............................................17

 

Channel / Frequency setting .........................................................18

 

Output frequency, Output channel, Modulator .................................19

 

Output level ................................................................................20

 

Input channel ..............................................................................20

  Setting the fine-tuning ..............................................................21

 

Hierarchical modulation ...............................................................22

 

Station filter ................................................................................23

  Test the status of the individual stations  .....................................24

Summary of Contents for CGT 660






































Reviews: