![background image](http://html1.mh-extra.com/html/triax/cgt-660/cgt-660_assembly-instructions-manual_1160868012.webp)
- 12 -
CGT 660
4
t
he
Control
panel
at
a
glanCe
4.1 m
enu
items
Program the COFDM-QAM module using the buttons on the head-end station
control panel. The menus appear on the two-line display of the control panel.
The parameters and functions to be set are underlined.
With the button select the channel strip / other modules.
You can use the button to select the following menu items:
– Activating the module and channel strip
– Channel setting / frequency setting
– Output channel / output frequency
– Output level
– Input channel
– Hierarchical modulation
– Station filter
– CA module (if available, only channel strip A)
PID Check
Menu/Edit
– QAM modulation
– Stuffing
– Substitute signal
– Network Information Table (NIT)
– Network/operator identification (Conditional Access Table)
– Deleting/Renaming a PID
– Factory reset
– Save data
4.2 f
unCtions
of
the
Control
panel
but tons
S
M
To move the cursor, call up
functions
To adjust values and functions
To save the programmed data
To switch to the next menu