![background image](http://html1.mh-extra.com/html/triax/cgt-660/cgt-660_assembly-instructions-manual_1160868028.webp)
- 28 -
CGT 660
n
et work
/
oper ator
identifiCation
In this menu, you can change the network/operator identification (CAT-ID –
C
onditional
A
ccess
T
able -
Id
entification), for example of the visAvision trans-
ponder (Eutelsat 8° West).
Bx 1A
/B
0xDE00
CAT-ID
off
CAT is not to be changed.
• Press the
button.
—> The "Saving data" – "
MEMORY
" menu is activated (page 32).
CAT is to be changed.
The network operator e.g. requires that you set the operator ID of the visAvision
transponder to "2".
•
Use the
buttons to position the cursor under the digit to be set.
• Use
to change the operator ID from "
0xDE00
" to "
0xDE02
".
• Use the
button to position the cursor under "
off
," then use
to acti-
vate the new CAT "
on
".
—> The menu display switches to "
modified
".
—> If you try to change the network/operator identification (operator
ID) of a transponder which cannot be modified, "
not modified
" ap-
pears in the display.
• Press the
button.
—> The "Deleting/Renaming a PID" – "
PID
" menu is activated