Triax CGT 660, Assembly Instructions Manual

Page: 23 / 37

- 23 - CGT 660
s
tation filter
The default setting for the station filter is " off ".
In this menu you define the stations received to be transmitted. If stations are
deactivated the output symbol rate is reduced.
Bx 1A /B
Filter
PROGRAM
off
01/04 Bx 1A /B TV +
ZDF
M
S
• Press the button.
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following error message will appear in the
display " FILTER: no Service ".
In this case, check the configuration of the antenna system and
head-end station, as well as the previously adjusted settings for the
COFDM-QAM module.
—> The display shows e.g.: Bx 1A TV + 01/04
ZDF
Meaning of the indicators in the example:
" Bx 1A " Slot 1, channel strip " A "
" TV " TV channel type
" + " The currently selected station is switched on.
" 01/04 " The 1st of 4 stations is being displayed.
" ZDF " Station name
Further possible terms displayed:
" RA " Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
" – " The currently selected station is switched off.
" * " The star means that the TV or radio station selected
is scrambled. To enable the stations, the CA module
and the appropriate smart card of the station pro-
vider are required.
—> If a service number (e.g. " SERVICE 131 ") appears instead of " TV " or
" RA ", this indicates that an unnamed station or an undefined data
stream is being received.