- 4 -
CGS 470
2.2 m
eaning
of
the
symbols
used
Important note
—>
General note
– /
– /
Optional use of the buttons
•
Performing works
2.3 t
eChniCal
data
The requirements of the following are met:
2011/65/EU, 2014/30/EU, 2014/35/EU
The product fulfils the guidelines and standards for CE labelling.
Unless otherwise noted all values are specified as "typical".
RF input:
Frequency range: ....................................................... 950 … 2150 MHz
Level: ..................................................................... 60 dBμV … 80 dBμV
Input impedance: ...............................................................75 Ω, nominal
Return loss: .....................................................................................8 dB
Input data rate: ...............................................................1 … 45 MSymb
Remote power supply: .................. 12 V / 350 mA (switch-off at short-circuit)
Output specifications:
Audio
Noise voltage ratio rated (DIN 45633): ...........................................60 dB
Non-linear distortion factor: ............................................................0.6 %
Frequency range: ..........................................................20 Hz … 15 kHz
Level at -12 dB: .......................................................................500 mV
rms
Impedance: ............................................................................ max. 1 kΩ
Video
Signal-to-noise ratio:.............................................................58 dB (rated)
Level (75
Ω)
: ..................................................................................1 V
pp
Impedance: .................................................................................... 75
Ω
Connections:
SAT inputs: ............................................................................ 2 F-sockets
Connection strip (20-pin): ................... For supply voltages and control circuits
AV output: ........................................................................... 26-pin socket
