- 19 -
CGS 470
i
nput
frequenCy
—> This menu is only displayed in selection channel strip A and selec-
tion channel strip D with setting "Tuner Line D".
—> Once the HF receiver has synchronised to the input signal, any
offset to the target frequency is displayed in MHz, e.g. "
+ 0.2
".
—> If a question mark "
?
" appears in the second line of the display,
there is no input signal present. Check the configuration of the an-
tenna system and head-end station as well as the preceding settings
of the module in question.
Bx 1A
11836 MHz
FREQ
+0.2
• Using the
buttons, move the cursor under the digit of the frequency
displayed to be set.
• Use the
buttons to set the input frequency.
• Press the
buttons to adjust the input frequency displayed so that the
frequency offset amounts to less than 1 MHz.
—> A status LED indicates the quality of the received transport stream::
Status LED
Tuner ”
A
“
Status LED
Tuner ”
D
“
LED indicator
Signal quality
Green
Good
Orange
Poor
Red
no signal
• Press the button.
