![background image](http://html1.mh-extra.com/html/triax/cce-210/cce-210_assembly-instructions-manual_1160853023.webp)
- 23 -
CCE 210
Output IP address
In this menu you set the output IP address for the selected transport stream.
IP 1
/2
227. 40.
OUT-IP
50. 60
• Press the
buttons to select the digit of the IP address to be set.
• Using the
buttons set the IP address wished.
As by setting
IP SPTS
two transport streams are provided, the settings "MODE/
PORT", "PKTS/FEC" and "OUT-IP" must be done two times (IP 1 and IP 2).
After the settings for IP 1 button
will take you to the settings for IP 2.
Allocate different IP addresses to the transport streams!
• Press the
button.
—> Return to the main menu "Output signal path"
• Press the
button.
—> The "Input parameter" – "
INPUT
" main menu is activated.
—>
If you do not want to do input settings, press the
button. The
"ASI station filter" – "
ASI
" main menu is activated (page 28)
Input parameter
In this menu you select the input, you would like to set the input parameters in
the submenus (AV 1 or AV 2).
Bx 2
AV 2
INPUT
=>
Bx 2
AV 1
INPUT
=>
• Using the
buttons select the corresponding input.
• Press the
button.
—> The "Data rate of the video signal " – "
BITRATE
" submenu is acti-
vated.