![background image](http://html1.mh-extra.com/html/triax/cce-210/cce-210_assembly-instructions-manual_1160853030.webp)
- 30 -
CCE 210
Transport stream ID and ORGNET ID
If the input signals are encoded to a separate transport stream (e.g. setting of
the output signal path -> ASI without any ASI input signal), a new ORGNET-ID
must be assigned to the transport stream.
Bx 2
0x0001,0100
TS/ONID
• Use the
buttons to select the digit of the hexadecimal number to be set
and use the
buttons to set the desired character.
• Press the
button.
—> The "
NIT
" main menu is activated.
NIT
Is a NIT generated via the remote control software CCRS 1000 (from SW V39
on), the
CCE 210 is included. In this menu the NIT can be switched on or off.
Bx 2
off
NIT
• Use the
buttons to switch off or on the NIT.
—> To get access to this menu a NIT must be generated via CCRS 1000
(from SW V39 on) and transmitted to the cassette.
• Press the
button.
—> The "Factory reset" – "
FACTORY Defaults
" main menu is activated.