![background image](http://html1.mh-extra.com/html/triax/cce-210/cce-210_assembly-instructions-manual_1160853008.webp)
- 8 -
CCE 210
If necessary, you can activate the indication of the software version of the
control unit manually:
• Press any two keys on the control unit of the head-end station simultaneously
until the display goes dark and the software version, e.g.
"
V 43
" appears.
3
Assembly
3.1 Installing the cassette
– Ensure the head-end station is mounted so it will not be able to vibrate.
Avoid, for example, mounting the head-end station onto a lift shaft or any
other wall or floor construction that vibrates in a similar way.
–
Before installing or changing a cassette unplug the power cable from the
mains power socket.
• Remove the fastening screws
1
of an unoccupied slot from the bracket of
the head-end station.
• Insert the cassette in this slot and push it into the housing.
• Align the cassette and apply slight pressure to connect it to the connections
of the board and the HF bus bar.
• Fasten the cassette with the screws
1
.
0°
1
1