manualshive.com logo in svg

TRIATEK HMS-1655L, Installation Manual

Share
Download
TRIATEK HMS-1655L Installation Manual Download Page 31

SUBHEAD

HMS-1655L Quick Start Guide

Due to continuous improvement, Triatek reserves the right to change product specifications without notice.

- 

31 

-

real-time view display at any time, tap the 

Exit

 button to return to the 

Real-Time View 

menu.

Enabling Emergency Purge Capability

The HMS-1655L may be configured to enable a convenient feature 

that allows the fume hood to be put into a maximum face velocity 

mode, or 

Emergency Purge

 mode, for emergency situations where 

the exhaust valve is forced to its maximum open position. To enable 

the 

Emergency Purge

 mode at the main display of the HMS-1655L, 

set the configuration dipswitch S2 accordingly (see table on page 30). 

Setting position 2 of S2 to the ON position enables the 

Emergency 

Purge

 feature, and results in the ‘Press for 

Emergency Purge

’ button 

appearing on the as shown in Figure 10.

Triatek reserves the right to change product specifications without notice.

HMS-1655L

QUICK START GUIDE

Figure 10. Tapping 

the Emergency Purge 

button instantly puts the 

fume hood in maximum 

face velocity mode.

Triatek reserves the right to change product specifications without notice.

QUICK START GUIDE

Summary of Contents for HMS-1655L







































Reviews:

No comments

Brands by name

Popular brands

Load more brands