manualshive.com logo in svg

TRIATEK HMS-1655L, Installation Manual

Share
Download
TRIATEK HMS-1655L Installation Manual Download Page 2

Due to continuous improvement, TRIATEK reserves the right to change product specifications without notice.

CONTROLLER SETTINGS

HMS-1655L Fume Hood Controller Settings

HMS-1655L

- 

2 

-

This form should be completed during the initial configuration for each fume hood controller. 

Fume Hood Name / Number
Unit Model Number and Serial Number (ESN)

Sidewall Sensor Input

Normal Operating Face Velocity 
Sensor Linearization (enabled or disabled)
Sensor Input Mode (normal or inverted) 
Sensor Input Range (zero-based or offset) 
Occupied Mode Setpoint 

 

Unoccupied Mode Setpoint 

Analog Output

Operating Mode (Direct or PID)
Analog Output Range (zero-based or offset)
Analog Output Upper Limit (0 – 100%)
Analog Output Lower Limit (0 – 100%)
Analog Output Input Channel (AI-1 thru AI-4)
Analog Output Action (Direct or Reverse)
Analog Output Range (zero-based or offset)

PID Constants

Proportional Constant (0.5 – 100.0 %) 
Integral Constant (0.0 – 100.0 %) 
Derivative Constant (0.0 – 100.0 %)

Alarm Limits

Occupied Mode High Alarm Setpoint 
Occupied Mode High Warning Setpoint 
Occupied Mode Low Warning Setpoint 
Occupied Mode Low Alarm Setpoint 
Unoccupied Mode High Alarm Setpoint 

Triatek reserves the right to change product specifications without notice.

Summary of Contents for HMS-1655L







































Reviews:

No comments

Brands by name

Popular brands

Load more brands