11
INSTALLING THE PETROSMART EZ CONSOLE
1. Mount all in Make sure that all system component connections and cables are properly assembled
before turning on the power to any of the components.
2. Interconnect boxes near the wire trough, or where the conduit from the pumps/dispensers enters
the building.
3. Place the console in a location that allows an unobstructed view of all fueling positions at the site.
Fig. 7. Back View of the PetroSmart EZ Console
Cable Connections
The connection between the PETROSMART EZ console and the interconnect box marked “DISPENSER
CONTROL” is made via a 25 foot round cable having 15-conductors and DB-15 type connectors. Connect this
cable at the connector marked PUMP CONTROL on the back of the EZ console to the connector labeled “2” on
the front pan of the dispenser IC Box.
Longer cables are available to fit the particular needs of the installation site. The maximum recommended
distance between the PETROSMART EZ Console and the PETROSMART EZ, “DISPENSER CONTROL”
interconnect box is 500 feet. Consult TMS for prices and availability.
A connection is made between the IC Box back pan to the front pan is made via a 3 foot round cable having 15-
conductors and DB-15 type connectors to the right most connection labeled “3” or the right most connection when
the door is closed.
Refer to the PetroSmart EZ console, programming/operators guide on how to program the console.
COM 1
PUMP
CONTROL
COM 2
MODEM
DC
POWER
Triangle MicroSystems Inc., Raleigh, N.C.
PetroSmart EZ Control Console Serial # XXXXX
Made in the U.S.A.
PRINTER
