8
©Triad Aer 2012: All Rights Reserved
Ideal Placement
There are several important factors to consider when selecting a location for your Triad Aer:
• Make sure the location you choose is as far away from the HVAC air return duct as possible. This will ensure that the
purification produced by the Triad Aer is optimally circulated.
• Place the unit on top of something tall such as a bookcase, a shelf or a mounting bracket, leaving only 12 to 24 inches
between the unit and the ceiling.
• To ensure the unit works properly, there should be as much space as possible in front of your Triad Aer so that it can
efficiently process the air in the area.
• Never place an operating unit on the floor.
Initial Setting
Before using the unit you will need to find the area (or square footage) of the environment. To do this accurately, take
into account all connected rooms with open doorways (the purification does not flow readily through closed doors).
The Triad Aer can purify up to 3,000 square feet of space.
For example: Suppose you have a 2500 square foot house. The living room is attached to the kitchen, three bedrooms,
the den and a laundry room. The kitchen and three bedrooms’ doors remain open the majority of the time but the
laundry room and den usually remain closed off from the rest of the house. Together, the laundry room and den have a
combined area of 500 square feet. The area of the environment you would want to set your Triad Aer and purify would
be 2000 square feet.
Once you have determined an ideal location for your unit and calculated the area of the environment:
1. Connect the Power Cord into the unit.
2. Insert the Power Plug into the wall outlet.
3. Turn the unit on and set it to NORMAL mode (see CONTROLS: page 7)
4. Leave the unit on NORMAL mode for at least 24 hours to begin with.
5. After 24 hours, set the unit to HIGH mode and set the square footage to 250 square feet.
6. Gradually increase the square footage setting every 8-12 hours until you reach the accurate square footage of your
area which you calculated in the beginning steps). Note: Using the purifier at a setting less than the square footage of
the area being treated is acceptable and may be desirable in an environment relatively free of pollutants.
Setup
Summary of Contents for air purifier system
Page 14: ...14 Triad Aer 2012 All Rights Reserved Notes...
Page 15: ...15 Notes...
