PowerHawk 6212, 6312 and 6412 meters
930-108-01-A.04
Installation
01/2011
© 2011 Triacta Power Technologies All Rights Reserved
16
Figure 10: PowerHawk 6312 mA current transformer
Installing the CTs on the PowerHawk 6212 and PowerHawk 6312
Do not apply power until you have made these connections and followed all
of the instructions below:
•
connect all CTs to the appropriate circuits
•
connect the CTs to the cables
•
connect the cables to the PowerHawk meter
To install the mA current transformers on the PowerHawk 6312 or the 0.333V
current transformers on the PowerHawk 6212, follow these steps:
Energy
Flow
Load
Source
X1
X2
H1
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
•
Turn off all power supplying this equipment before working on or
inside the equipment.
•
Always use a properly rated voltage sensing device to confirm the
power is off.
•
Do not crimp the insulation when making the wire connections.
Failure to follow these instructions will result in death or
serious injury.
