930-108-01-A.04
PowerHawk 6212, 6312 and 6412 meters
01/2011
Installation
© 2011 Triacta Power Technologies All Rights Reserved
9
Mounting the PowerHawk 6212, 6312 and
6412 meters
Mount the PowerHawk 6212, 6312 and 6412 meters adjacent to the main
circuit breaker box using the 1-inch (25-mm) #8 screws as shown in Figure
4. If mounting the unit on a plasterboard surface, use cylinder plugs.
1.
Remove the front cover from the meter by removing the four screws
with a #2 Phillips screwdriver. Retain the cover and screws for later
re-installation.
2.
Mount the PowerHawk meter on the wall and secure it by inserting a
screw in each mounting keyhole and tightening the screws.
Figure 4: Mounting Dimensions and Clearances
11.0 in
27.9 cm
(6312)
10.67in
27.1cm
6 in
15.2 cm
6.0 in
15.2 cm
4
1
2
1
1
1
2
2
2
3
Legend:
1 Mounting keyhole
2 Cover screw location
3 Electrical distribution panel
4 CT conduit
5 Power conduit
5