TRI tool 601SBM, Operation Manual

Page: 10 / 56

TRI TOOL INC.
92-0092 Rev. 210701
8
3. GENERAL DESCRIPTION
The Model 601SBM Low-Profile Clamshell is a split-frame pipe lathe designed for severing
and beveling in-line pipe with a minimum range of 1/4" through 1" pipe with minimal radial
and axial clearance.
Using Standard Tool Blocks the Model 601SBM may be configured to perform the following
operations:
• Sever in-line pipe.
• Sever and bevel in-line pipe.
• Sever and double bevel in-line pipe.
Design and Operation Features
The easily adjustable precision bearing surfaces pre-load and stabilize the rotating head to
provide long life, low maintenance, stability, and precision.
The Clamshell splits into two halves for mounting on closed loop systems.
All parts are secured to the two halves, thus avoiding the loss of parts and at the same time
providing maximum ease of handling.
The Clamshell is equipped with Adjustable Clamping Pads and Jackscrews for out-of-round
pipe conditions.
Dual Tool Blocks with Auto-feed Sprockets and Adjustable Slides provide maximum
maintainability, life, and operator safety, with a minimum of operator training.
The Auto-feed Sprockets provide .003” (.08 mm) of radial feed per revolution of the
Headstock for a controlled depth of cut.
The drive gears and bearing surfaces are covered for operator safety and are sealed to
provide protection from dust and chips.
The operator’s controls are located away from the rotating Headstock for the operator’s
safety.
A modular design concept provides quick, easy maintenance and maximum versatility in the
drive and tooling options.
A detachable right angle provides maximum handling ease and low axial clearance.
.