TRI tool 180531, Operation Manual

Page: 16 / 95

14
TRI TOOL INC.
92-1456 Rev. 180531
1. Before any adjustment can be made, all
hex screws must be loosened and the
inside cup brush must be loosened.
2. Rotate axial adjustment screw clockwise
until it stops.
3. Push the tool bit holder until it bottoms in
the tool slot and tighten all hex screws.
Measure height for step 'B'.
6. Use a feeler gauge to
measure gap between tool
bit and tracking wheel to
adjust the land thickness
of the prep.
4. Loosen the
tracking wheel
shoulder bolt.
5. Rotate tracking
wheel eccentric
shaft to adjust the
land thickness.
7. Tighten the tracking
wheel shoulder bolt.
8. Reset and tighten cup brush.
STEP ‘A’ - ADJUSTING RADIUS TOOL HOLDER ASSEMBLY
B