U-Line H-2028 Quick Start Manual Download Page 1

PAGE 1 OF 9 

0421 IH-2028

1-800-295-5510

uline.com

H-2028

BOSTITCH B8

®

 

DESKTOP ELECTRIC 

STAPLER

PRODUCT OVERVIEW AND SPECIFICATIONS

Operating Voltage

120V AC 60 Hz

Operating Current

3.0 Amps

Staple Size

B8 1/4", B8 3/8"

Magazine Capacity

220 Staples

Stapling Capacity

2 to 45 Sheets of 20 lb. bond paper

Maximum Stapling Speed 1 per second

Operation Stapling Rate

20 staples per minute, operation 

continuity after 30 minutes should have 

10 minutes rest. Not recommended for 

daily continuous use in a manufacturing 

or production environment.

Dimensions (L x W x H)

8.504 x 3 x 5.82"

Weight

2.341 lb., 37.4 oz.

Throat Depth

3/8"

GENERAL INFORMATION

PRIOR TO USE

•  This stapler is to be used on 120V AC outlets only.

•  Always unplug the stapler before cleaning or 

attempting to clear a staple jam.

•  The stapling capacity has been designed to staple 

a maximum of 45 sheets of standard bond paper.

•  The optical sensor firing mechanism may not 

actuate when in direct sunset.

SAFETY PRECAUTIONS

•  Do not operate electric stapler with a damaged 

cord or plug, after stapler malfunctions, or when 

stapler has been damaged in any manner.

•  Unplug unit from outlet before cleaning or removing 

a staple jam. Grasp plug, not the cord, when 

disconnecting stapler from outlet.

•  Do not allow electrical components to get wet.

•  Keep fingers, hair, jewelry and foreign objects away 

from stapler opening.

•  Do not disassemble the stapler. Should your stapler 

require servicing at any time, call Uline Customer 

Service at 1-800-295-5510.

•  This stapler is not intended for heavy commercial 

use. Do not use the stapler for stapling hard 

materials like cardboard or heavy plastic.

•  Do not operate stapler without inserting paper, and 

refrain from double stapling (stapling over a staple).

COMPATIBLE STAPLES

3/8"  

S-14137

1/4"  

S-17849

Low Staple Supply Indicator Light

Magazine 

Release 

Button

Staple Magazine/Magazine Extension

Housing

Clincher

Para Español, vea páginas 4-6.

Pour le français, consulter les pages 7-9.

Summary of Contents for H-2028










Reviews: