PAGE 2 OF 9
0421 IH-2028
LOADING STAPLES
For best performance, use S-17849 or S-14137 staples.
1. Press the magazine release button. The magazine
extension will eject outward. (See Figure 1)
CAUTION! DO NOT press magazine release
button with your face directly in front of the
stapler. It may result in injury.
2. Grasp the magazine extension and pull forward to
ensure a full strip of staples can be inserted.
(See Figure 2)
CAUTION! There may be staples in magazine.
Be sure they are in position before adding new
staple strip. Make sure staple strip is correctly
inserted and properly seated before closing.
3. Push the magazine back into the housing until it is
firmly locked in position. (See Figure 3)
NOTE: To prevent damage to the driver
element, the magazine must be completely
pushed back and locked before stapling.
STAPLING
1. Insert paper directly under magazine. (See Figure 4)
2. Be sure to cover staple clincher.
3. When stapling 2-20 sheets of 20 lb. bond paper, use
S-17849.
4. When stapling 20-45 sheets of 20 lb. bond paper,
use S-14137.
LOW STAPLE SUPPLY INDICATOR LIGHT
This stapler is designed to indicate when staple supply
is low. A blue light will come on at the top of the stapler
and will remain on until staples are inserted and
magazine is closed. (See Figure 5)
OPERATION
Figure 4
Figure 1
Figure 3
Figure 2
Magazine
Extension
Magazine
Figure 5
Low Staple Supply
Indicator Light
