TRI tool 180531, Operation Manual, Page: 17 / 95

15
Model PFM 1632 PIPEMASTER®
92-1456 Rev. 180531
STEP ‘B’ - ADJUSTING THE INNER BEVEL TOOL HOLDER ASSEMBLY
1. Before any adjustment can be
made, all hex screws must be
loosened and the inside cup brush
must be loosened.
2. Rotate axial adjustment screw to
adjust tool holder height and after
adjustment is done tighten all hex
screws.
7. Take this measurement for Step 'C'.
3. Adjust this height to match
measurement
taken in step 'A'.
5. Use a feeler gauge
to adjust this
height. (Add the
land thickness to
the radius of the 'J'
bevel minus the
radius of the
insert.) .Rotate
tracking wheel to
adjust accordingly.
Example:
land
thickness – insert
3.2 mm + 1.2 mm
– 2.3 = 2.1 mm
4. Loosen the tracking
wheel shoulder screw.
6. Tighten the tracking wheel shoulder
screw.
7. Reset and tighten the cup brush.