TREVIDEA Girmi SS01, User Manual

Page: 14 / 44

13
Do not fill the tank above the maximum capacity and do
not introduce into the tank mixtures for removing stain,
vinegar, descaling agents or chemicals in general.
Use the appropriate refill cup to fill the tank of the boiler;
do not fill it directly under the tap or with very cold
liquids.
Always select the most suitable temperature according to
the fabric to be ironed.
After ironing, drain all the water pushing the appropriate
release button, empty the tank and wait for the cooling of
all parts before storing the system.
CAUTION: the iron plate gets very hot during
use, be careful not to touch it, serious risk of
burns. Do not put your face near the steam coming out
the iron plate.
For correct boiler closing, press the cap while rotating.
DESCRIPTION SS01
(1) Main unit/boiler (2) Iron power on button and working light
(3) Control light: “Steam ready” (4) Steam control knob
(5) Boiler power on button and working light (6) Steam cord
(7) Power cord (8) Insulating rubber base
(9) Cap Water level control light (10) Iron plate
(11) Temperature control knob (12) Continuous steam button
(13) Steam button (14) Cork iron
(15) Iron cable attachment (16) Iron body
INSTALLATION
Place the ironing system on a stable surface, away from heat sources.
Unscrew the cap (9) and fill the tank using the appropriate dispenser without reaching the maximum capacity
of 700cc. On first use, or after the iron has been unused for a long time, it is recommended to expel the steam
by pushing the button (12 and 13) for about 20 seconds. This procedure allows to eliminate any working or
limestone leftovers.
For correct boiler closing, press cap while rotating it.
OPERATING THE IRONING SYSTEM
- Power on the unit by placing the knob (5) to position "1". The button will light up to indicate that the boiler
is heating up.
- CAUTION : when the tank control light (3) lights up, it means that the boiler is ready to produce steam.
During normal operation, the light lights on intermittently.
- Turn on the iron by switching the knob (2) to position "1". Adjust the temperature using the control knob
(11) according to the fabric to be ironed (see table at page 14). The ironing temperature control light (14),
placed on the iron, will light to show when the iron is heating up.
- CAUTION : when this light goes off, it means that the iron has reached the desired temperature. During
normal operation, the light lights on intermittently.