15
Setting the temperature
1)
Place the iron on the insulated rubber housing above the boiler.
2)
Plug the system to the electrical outlet, and switch the power button (6) to "1" position.
3)
Select the temperature regulator (11) according to the symbols shown on page 7. The chosen symbol
has to be aligned with the mark placed on the body of the iron. The iron plate temperature control light,
placed on the side of the iron, shows that the iron plate is warming up. Wait until the light turns off to
start ironing.
Caution
:
While ironing, the control light lights up periodically indicating that the temperature is constant. If
you lower the thermostat, do not start ironing until iron temperature control light turns off.
STEAM IRONING
Before using the steam, check the water level first. The steam that the boiler supplies to the iron can be
adjusted with the steam control (4). Place the steam control between minimum and maximum depending on
the quantity of steam and the temperature selected.
At this point you can use the jet steam or the continuous flow of steam by pushing the proper button (13). It's
possible to use the vertical jet of steam; pressing the steam button (13) periodically allows to freshen up
curtains, hanging clothes, etc ...
Caution
:
to avoid the dripping of water, it is recommended to only use steam at high temperatures.
DRY IRONING
For dry ironing, switch to "0" the steam flow control knob (4). In this way the steam
feature is disabled.
CLEANING
Before cleaning any part of the product, ensure that the unit is unplugged from the electrical outlet, the
ironing plate is not hot and that the boiler is turned off.
Any leftovers on the ironing plate can be removed with a damp cloth or with a non-abrasive detergents. Do
not scrape the ironing plate with iron sponge or metal objects. The plastic parts can be cleaned with a damp
cloth and neutral detergent, then wiped with a dry cloth. Do not immerse the unit in water.
BEFORE STORING
•
Turn off the boiler and put the iron on the insulating rubber base.
•
Remove the remaining water by pressing the button (13).
•
Unplug the system from the outlet.
•
Allow the plate to cool down completely.
•
Wrap the power cord around the boiler.
TECHNICAL FEATURES
•
Power supply: AC 230V
~
50 Hz. Total power: max 2000W
•
Iron power: max 800W. Boiler power: max 1200W
•
Safety cap
•
Tank capacity: 700cc - Pressure: 3 Bar
Summary of Contents for Girmi SS01
Page 43: ...42...
