7
REMOTE CONTROL:
12
12. Power ON/OFF.
13
13. Input mode selection (AUX, Bluetooth, USB, SD).
14.
, previous song button.
14
15.
, Play/pause button.
15
16.
, next song button.
17. EQ selection button (0: NORMAL; 1: ROCK; 2: POP; 3: CLASSICAL; 4: JAZZ;
16
5: COUNTRY).
17
18. Volume increase.
19. MUTE button.
18
20. Volume decrease.
19
21. Under Bluetooth mode, search for new device again
.
20
REMOTE CONTROL BATTERIES
21
Insert two "AAA" batteries according to the markings inside compartment
.
INSTALLATION
POWER SUPPLY
Connect the DC plug of the supplied AC adapter to the 5V
2A socket (9) located at the back of the appliance. Connect
the supplied power adapter to an electrical outlet.
POWER ON/OFF AND AUTO POWER OFF FUNCTION
1.
Hold the button (1) for a few seconds or press the button (12) on the remote control to switch ON the device.
2.
Hold the button (1) for a few seconds or press the button (12) on the remote control to switch OFF the device.
This device is equipped with Auto Power Off function; this function allows the automatic shutdown when no audio
signal inputs after 10 minutes.
Note: If the Sound Base does not react to any operation or does not work properly, disconnect the power cable
for 30 seconds to reset the
DEVICE
.
VOLUME ADJUSTMENT AND MUTE FUNCTION
Is possible to adjust the unit's volume with the volume keys (3, 4 on the device, 18, 20 on remote control)
1.
Press (18) button on remote control or press
(3) button for a few seconds to increase the device's volume.
2.
Press (18) button on remote control or press
(4) button for a few seconds to decrease the device's volume.
Note:
When connecting to the headphone output of a TV or a
DEVICE
that has its own speakers, these usually are
disabled and to
HAVE
a good output signal need to adjust the
VOLUME
to the maximum
LEVEL
through the com-
mands of TV (or
DEVICE
).
When connecting to the audio output of a TV-Scart (or any audio output that is not the headphone jack of
another
DEVICE
), the
LEVEL
of the sound output is constant and not adjustable
VIA
the command own the TV (or
DEVICE
); the speakers of the TV (or
DEVICE
) is not disabled and if you want to silence them need to lower the
VOLUME
completely otherwise the reproduction is in addition to the Sound Base.
MUTE function: Press MUTE button (19) on the remote control to activate the mute function; to reactivate listening,
ENGLISH
SB 8340 SW
