EC 880
4_
ENGLISH
TOOLTIP
1. AL/OFF, alarm off
2. HOUR button, increase in hours
3. MIN button, increase in minutes
4. SNOOZE/DIMMER button, tempora-
ry alarm off/display Dimmer
5. ALARM1 button, alarm1 adjustment
6. ALARM2 button, alarm2 adjustment
7. TIME button, time adjustment
8. AL1/AL2 indicator
9. LED display
10. Backup battery compartment
POWER SUPPLY
Plug the cord into any 230V
50Hz home outlet. The entire display will flash
until the time won’t set.
CLOCK SETTING
1. Press and hold the TIME (7) button for 2 seconds, the indication on the
display will start blinking; press the HOUR (2) button to set the hour.
2. Press the MIN (3) button to set the minutes.
3. Press the TIME (7) button to confirm the setting, the indication on the
display will remain fixed.
ALARM SETTING AND ACTIVATING
1. Press the button ALARM 1 (5), the indication on the display will start blin-
king; press the HOUR (2) button to set the alarm time.
2. Press the MIN (3) button to set the alarm minutes.
3. Press the button ALARM 1 (5), to confirm the setting. The display will turn on
the alarm indicator (8).
4. To set ALARM2 follow steps 1 to 3 by pressing the button ALARM 2 instead
of ALARM 1.
SNOOZE FUNCTION AND DISABLE ALARM
1. During the alarm sound, press the SNOOZE (4) button to momentarily stop
the alarm, the alarm indicator (8) will start flashing. After nine minutes the
alarm will sound again.
2. During the alarm sound, press the AL/OFF button (1) to permanently stop
the alarm. The alarm will remain active and will play 24 hours later.
3. Press the button twice ALARM1 (5) or ALARM 2 (6) to deactivate the corre-
sponding alarm. The display will turn off the corresponding alarm indicator
(8).
BATTERY BACK-UP
To keep the clock running and alarm storage even during a momentary power
failure, insert two “AAA” batteries into the battery compartment (10) on the
bottom. We recommend replacing these batteries every 6 months.
If in case of a blackout the monsters on the display unit and flashing the
wrong time to replace the batteries.
TECHNICAL CHARACTERISTICS
Power Supply: .................................................... 230V
50Hz
Max Power consumption: ............................. 4W
TREVI pursues a policy of continuous research and development. Therefore,
the products may show different characteristics from those described.
