13
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel/fax:+48 58 56 300 80
11.
Download
Connect the cable to the mixer. Then connect the mixer to the network.
Start the mixer before loading. Always load only the rotating drum.
Do not throw stuff in a concrete mixer to avoid bounce back from the drum. Ship over the
edge.
Note: The engine is equipped with a mixer thermal protection to prevent overheating.
Thermal protection is automatically activated when overheated and shut off automatically
when the engine cooling.
To get the best results when working:
1. Add the required amount of gravel in the drum.
2. Add the cement.
3. Add the required amount of sand.
4. Pour the water into the drum.
Unloading
Do not turn off the mixer when it is complete. Unloading should be done only when the
rotating drum.
12. Maintenance of equipment
Thoroughly clean the mixer at the end of the working day. Keep it clean. Once cured, the
cement must be removed from the drum. Do not attempt to clean the accumulated stale
concrete trowel, hammer and other tools, as this may cause damage to the concrete mixer.
The drum is cleaned for approximately 2 minutes using a mixture of water and gravel size of
about 25 mm. After cleaning unload a mixture of water and gravel and wash drum spray
water inside and outside.
Do not pour water on the motor housing and especially the vents.
Remove any foreign matter from the engine casing. Do not use harsh chemicals and liquids
to clean the body parts
Environmental protection
Electric power tools, as well as their accessories and packaging, must each be able
to follow an appropriate recycling pathway. Only for the countries of the European
Union:
Do not throw away your electrical appliance with the household waste! In accordance
with the European Directive 2012/19 / EU on waste electrical and electronic equipment
and its implementation in national laws, power tools that can no longer be used must
be separated and follow an appropriate recycling pathway.
