tresnar 6327 Instruction Manual Download Page 20

 

“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna                                                                                                                       

83-

200 Starogard Gdański tel/fax:+48 58 56 300 80 

www.ega.com.pl

   

 

 

EXTENSION 

Electrical extension cords can not be longer than 50m. The cross section of the cable must 
be not less than 1.5mm2 for 230V. 
Using  improper  extension  cords  can  cause  improper  operation  of  the  unit  in  the  form  of 
overheating and damage to the electric motor. 
It is only permitted to use extension cords corresponding to specifications - intended for use 
in outdoor conditions. Avoid using insufficiently isolated connections. 
Connections must be made with suitable protective equipment, suitable for use in outdoor 
conditions. Make sure that the extension cables used are dry and secure. 
Also check that the extension cords are away from liquid, sharp edges, and are not lying on 
the road that the vehicles travel. Do not allow the extension cord to reach the mixer. 
Extend the extension cord completely, otherwise it may overheat and cause fire. 

 

ELECTRIC SHOCK HAZARDOUS HAZARD 

Make  sure  that  the  electrical  network  of  the  mixer  is  adequately  protected  (electrically 
protected) according to the characteristics of the power source, voltage and current of the 
electric motor. Do not switch on or off the engine when standing in a wet or wet place. Also 
do not use the mixer in places with high humidity or wet conditions and do not expose it to 
external factors such as rain. 
Avoid  contact  with earthing elements such  as  fittings,  radiators,  handrails  and  refrigerator 
covers. Make sure your fingers do not come into contact with the plug pins when turning on 
and off. 
 

PERSONALITY 

Do  not  allow  unauthorized  persons  near  the  mixer.  Secure  the  mixer  from 
children. 

 

PRECAUTIONS 

When loading and unloading the mixer carefully step and balance. 
Never  stand  on  the  mixer.  If  the  mixer  drum  tilts  or  accidentally 
touches the moving parts of the machine, serious injury can result.

 

 

Do not keep stuff near the mixer (above or next to it) so that anyone 
who tries to stand on it will want to catch it. 
 

DO NOT COMPLETE THE MIXER 

Observing  the mixer's  design volume  will  result in  better and  safer 
work. Do not switch on the electric motor when the drum is full. 
Do not rotate the mixer (do not move) when the drum is filled with mortar. Do not use the 
mixer for its intended purpose. 
The mixer is not suitable for towing any vehicle. 

 
 
NEVER LEAVE THE WORKING MIXER WITHOUT SURVEILLANCE 

Do not leave the mixer until it stops completely. 

 

DISCONNECTING POWER 

Never open the engine hood before turning the mixer off the power 
source.  Disconnect  the  mixer  from  the  power  supply  when  not  in 

Summary of Contents for 6327



























Reviews: