34
42MM712 UKREV.1
Plug in the power cord, then press the main power switch to turn on the unit. The unit is now in standby
mode and ready for the current day and time to be set.
Setting the current time and day:
Setting up weekly operation:
Note:
•
To see your weekly settings again later, press and hold the Flame button for 3 seconds.
•
To cancel your weekly settings, press and hold the Heater button for 3 seconds in standby mode.
Press the Timer button to confirm, The 00 display will flicker. Click FAN and OSCILLATION (
),to adjust
the current day of the week (D1-D7), with “D1” being Monday, “D2” being Tuesday, and so on. Click the
Timer button again to confirm the entry for the current day.
Press the Flame button. The 00 display will flicker. Press the Flame button again to cycle though the
days of the week. Stop on the day you wish to program and wait for the display to stop flashing.
Once you have confirmed the day, the 00 display will flicker again. Click FAN and OSCILLATION (
) to
adjust the current hour (24 hr. clock). Click the Timer button to confirm the entry for the current hour of
the day.
Once you have confirmed the hour, the 00 display will flicker again. Click FAN and OSCILLATION (
) to
adjust the current minutes (0-59). Click the Timer button again to confirm the entry for the minute of the
current time.
4
3
3
5
2
2
1
1
Current and Weekly Settings
Click the Heater button to adjust the thermostat setting for your selected day. The 00 display will flicker.
Click FAN and OSCILLATION(
) to adjust the desired temperature. When the display stops flashing, the
temperature is set.
Click the Brightness button to select the startup time of the heater. The 00 display will flicker. Click FAN
and OSCILLATION (
) to adjust the hour. To confirm the hour, click the Timer button. The 00 display will
flicker again. Click FAN and OSCILLATION (
) to adjust the minute. Click the Timer button again to
confirm the minute.
Click the Speed button to select the end time for running the heater. The 00 display will flicker. Click
FAN and OSCILLATION (
) to adjust hour. To confirm the hour, click the Timer button. The 00 display
will flicker again. Click FAN and OSCILLATION (
) to adjust the minute. Click the Timer button again to
confirm the minute.
To complete the weekly program setup, press and hold the Timer button for 3 seconds. You will then see
your selections display for 5 seconds each, starting with the hour, followed by the minute, and then the
temperature.
Summary of Contents for 398399
Page 9: ...9 42MM712 UKREV 1 2...
Page 11: ...11 42MM712 UKREV 1 4...
Page 50: ...50 42MM712 UKREV 1 NOTES REMARQUES NOTAS...
