IMPORTANT:
Review this installation guide in its entirety before starting installation
of your Room Controller or removal of your old switches. Installation and maintenance
involving electrical wiring must be done by qualified person(s). Risk of Electric Shock:
Electricity can cause personal injury and property damage if handled improperly. The
metal heatsink plate is not grounding, which might become live.
CAUTION:
To reduce the risk of injury and/or overheating and damage to other
equipment:
• Make sure that the power at the circuit breaker is turned OFF before starting.
• A neutral (typically white) wire is required.
• The wire colors indicated in this manual are typically found and may differ in some
constructions / regions.
• Ensure the wire conductors are securely fastened to each wire.
• It is recommended that a certified electrician completes all high voltage electrical
installations.
• Must follow all building and electrical codes in the region when installing.
• Ensure the Wi-Fi router’s 2.4GHz signal is strong at the switch/luminaire location
(-80dB min).
• Do not install to control an appliance, motor, receptacle or traditional bulb/fixture.
• Recommended to be installed in a minimum 2.5" depth device box.
• Intended for installation in an in-wall electrical box.
NOTE: INSTALLATION OF THIS PRODUCT REQUIRES A
NEUTRAL WIRE. IF NEUTRAL WIRE IS NOT CONNECTED,
THIS SWITCH WILL NOT WORK. CONSULT A QUALIFIED
ELECTRICIAN.
THE ROOM CONTROLLER IS ONLY COMPATIBLE WITH
ONCLOUD OR WIZ CONNECTED LIGHTS.
Before you start
Summary of Contents for TLWZ-SNC-01
Page 34: ......
