Trenz Electronic TE0726 Manual Download Page 2

Page: 2 / 21

TE0726 TRM

Revision: V.3

Page of

http://www.trenz-electronic.de

Table of Contents

Overview _____________________________________________________________________________ 3

Key Features ________________________________________________________________________ 3

Block Diagram _______________________________________________________________________ 4

Main Components ____________________________________________________________________ 5

Initial Delivery State ___________________________________________________________________ 6

Signals, Interfaces and Pins ______________________________________________________________ 7

Camera Serial Interface (CSI-2) _________________________________________________________ 7

Display Serial Interface (DSI) ___________________________________________________________ 7

HDMI Interface ______________________________________________________________________ 8

Audio Output ________________________________________________________________________ 8

SD Card Socket ______________________________________________________________________ 8

FPGA IO Banks Pin Mapping ___________________________________________________________ 9

GPIO to Header J8 Interface Mapping ____________________________________________________ 9

Default MIO Mapping _________________________________________________________________ 10

LED's _____________________________________________________________________________ 11

On-board Peripherals __________________________________________________________________ 12

System Controller CPLD ______________________________________________________________ 12

Clocking ___________________________________________________________________________ 12

Hi-speed USB 2.0 and 10/100 Mbit Ethernet ______________________________________________ 12

USB to JTAG/UART _________________________________________________________________ 12

4-Channel I2C Multiplexer _____________________________________________________________ 13

Boot Process ________________________________________________________________________ 14

Power and Power-On Sequence _________________________________________________________ 15

Power Supply ______________________________________________________________________ 15

Power-On Sequence _________________________________________________________________ 15

Power Rails and Bank Voltages ________________________________________________________ 15

Variants Currently in Production __________________________________________________________ 16

Technical Specifications ________________________________________________________________ 17

Absolute Maximum Ratings ____________________________________________________________ 17

Recommended Operating Conditions ____________________________________________________ 17

Physical Dimensions _________________________________________________________________ 18

Weight ____________________________________________________________________________ 18

Revision History ______________________________________________________________________ 19

Hardware Revision History ____________________________________________________________ 19

Document Change History ____________________________________________________________ 19

Disclaimer ___________________________________________________________________________ 20

Document Warranty __________________________________________________________________ 20

Limitation of Liability _________________________________________________________________ 20

Technology Licenses _________________________________________________________________ 20

Environmental Protection _____________________________________________________________ 20

REACH, RoHS and WEEE ____________________________________________________________ 21

Summary of Contents for TE0726





















Search results

Summary of Contents for TE0726

Reviews:

Related manuals for TE0726

Brands by name

Popular brands

Trenz Electronic TE0726, Manual

Search results

Summary of Contents for TE0726

Reviews:

Related manuals for TE0726

Brands by name

Popular brands