E
xclusive
C
ertification
C
orp
.
Tel:886-2-2792-3366 Fax:886-2-2792-1100
Issued date: Dec. 16, 2003
20 of 20
EMC
Test Report: CE03111004-A
13. Notice for Class A Product
This Notice is for class A product only. If the Equipment under Test is a class B product,
this notice should be disregarded.
Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B
ITE limits. Such equipment should not be restricted in its sale but the following warning shall be
included in the instructions for use:
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
14. Declaration of Conformity and the CE Mark
There are three possible procedures pertaining to the declaration of conformity:
14.1.
Conformity Testing and Declaration of Conformity by the Manufacturer or His
Authorized Representative Established within the Community or by an Importer.
- Article 10 (1) of the EMC Directive, -
§
3 (1) no. 2a of the EMC Act.
14.2.
Declaration of Conformity Issued by the Manufacturer or His Authorized
Representative Established within the Community or by an Importer Following
Testing of the Product and Issued of an EC certificate of conformity by a
competent body.
- Article 10 (2) of the EMC Directive, -
§
3 (1) no. 2b of the EMC Act.
14.3.
Declaration of Conformity Issued by the Manufacturer or His Authorized
Representative Established within the Community or by an Importer Following
Testing and Certification of the Product by a Notified Body.
- Article 10 (5) of the EMC Directive,
-
§
3 (1) no. 2b of the EMC Act (radio transmitting installations).
14.4.
Specimen For The CE Marking Of Electrical / Electronical Equipment
The components of the CE marking shall have substantially the same vertical dimension, which
may not be less than 5 mm.