- 17 -
the following three types of filter. Each filter can be set to
filter
(drop)
or
forward (pass)
packets
.
You can input up to six filters in this device.
Network Adapter Address Filter
: Filter according to
local
computer’s network adapter MAC
address (also known as the adapter card’s Physical Address).
IP Address Filter
: Filter with computer’s IP address.
Single/Range
: You can filter a single IP, or a range of the IP addresses.
IP Range:
Enter the Start and End IP addresses for a range of IP addresses for filter/forward.
Direction
?
From Local IP
?
To Remote IP
: filtering IP address of a
local
computer; or
filtering IP address of a
remote
server (this remote server connects to the device via Internet).
TCP/UDP Port Filter
: Filter using the port number. You can set filter for a single port or a
range of ports.
Filter/Forward:
Select action (Filter/Forward) for the assigned port(s).
Single/Range
: You can filter a single port (i.e. 80), or a range of ports (i.e. 80 to 125)
Port Number
: The port number(s) for the filters.
Port Type:
??
TCP port
: filter according to the Connection-Based Application Service on the
remote
server using the port number.
??
UDP port
: filter according to the Connectionless Application Service on the
remote
server using the port number.
ADD
: Each time you finished setting the filters, click the
Add
button and the added filter will
appear on the
Filter List
.
RESET
: Click “RESET” to clear all the settings on this page.
Filter List:
Display
all the Packet Filters.
DELETE ALL
: Click to delete all the filters on the list.
DELETE
: Click to delete the selected filter.
