- 11 -
Service Name:
For identification purpose. If it is required, your ISP will provide you with the
information.
Static IP Address
: Enter the information provided by your ISP.
Static DNS Server
: Enter the information provided by your ISP.
Auto-disconnect if idle for
?
minutes
: Configure this device to auto-disconnect when there
is no activity on the line for a predetermined period of time.
??
Default: 5 minutes. You can input any number from 0 to 65535.
??
To keep the line always connected, set the number to 0.
?
Auto-reconnect :
Check to enable auto-reconnected. This function is helpful particularly
when you are logged off for problems caused at your ISP side.
Static Mode
Adapter Address
: This field is grayed out. The Adapter Address is a specific set of numbers
that identifies the network device; normally you don’t need to change it. In case there is a
need to modify your MAC address, check
?
Modify
and enter the new MAC address
accordingly.
Device/Computer Name
: Enter a descriptive name for identification purpose. Some Internet
Service Providers (ISP) requires this information and if that is the case, they will provide you
with the name.
Domain Name:
For example:
yourcompany.com
.
The maximum input for this field is 32
alphanumeric characters and it is case insensitive.
IP Config
?
Dynamic
?
Static
This line was grayed out. For static configuration, it was
preset, so no dynamic IP address is allowed.
IP Address:
Enter
the information provided by your ISP.
