TRENDnet TW100-BRV214, User Manual, Page: 45 / 82

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRV214
42
The DHCP client will be copied to the ID you selected in the list. Check the
Enable option next to the entry.
Click Save at the bottom of the page to save the changes.
Note: If you would like to discard the changes, click Undo before you click Save.
If you click Back, this will return you to the main DHCP Server page.
OR
Enter the DHCP reservation manually – Select one of the empty/available IDs
in the list and next to the ID # click on MAC Address and enter the MAC
address
(e.g. 00:11:22:AA:BB:CC)
of the computer or device for which you are
creating the reservation. Then click on the IP Address field and enter the IP
address
(e.g. 192.168.10.101)
to assign for the reservation and check the
Enable option.
Note: You cannot assign IP addresses outside of the DHCP range. The IP address
is required to be within the DHCP IP address range (IP Pool Starting Address &
IP Pool Starting Address) in the main DHCP Server page.
Click Save at the bottom of the page to save the changes.
Note: If you would like to discard the changes, click Undo before you click Save.
If you click Back, this will return you to the main DHCP Server page.
Enable/disable UPnP on your router
Configuration > Forwarding Rules > DMZ
UPnP (Universal Plug and Play) allows devices connected to a network to discover each
other and automatically open the connections or services for specific applications (e.g.
instant messenger, online gaming applications, etc.) UPnP is enabled on your router by
default to allow specific applications required by your computers or devices to allow
connections through your router as they are needed.
1. Log into your router management page (see “Access your router management page”
on page 36 ).
2. Click on
Configuration at the top of the page, click on Forwarding Rules , and click on
DMZ
.
3. Next to
UPnP setting, check the Enable option to enable UPnP.
Note: It is recommended to leave this setting enabled, otherwise, you may encounter
issues with applications that utilize UPnP in order allow the required communication
between your computers or devices and the Internet.
4. To save changes, click
Save at the bottom of the page.
Note: If you would like to discard the changes, click Undo before you click Save.