TRENDnet TV-VS1 User Manual Download Page 57

Page: 57 / 92

- 56 -

4.8.2

Event Configuration >> Arrange Schedule Profile



Schedule Profile:

This sub-menu displays the scheduled profile(s).

To customize the profile, click

Add

and then enter a descriptive

name for the profile in the prompt dialog window. After entering
the profile name, click

and the profile is added to the Schedule

Profiles list. To delete the profile, select the profile in the list and
click

Delete

Profile Name:

Display the profile name that you select in the

Schedule Profiles list.

Weekdays:

Select the weekday(s) that you want to separately

assign in the schedule profile. The weekday that has been
assigned will be displayed with green color.

Time List:

Display the time period that you have assigned within

the selected weekday. To assign the same time period to every

Summary of Contents for TV-VS1





























































































Search results

Summary of Contents for TV-VS1

Reviews:

Related manuals for TV-VS1

Brands by name

Popular brands

TRENDnet TV-VS1, User Manual

Search results

Summary of Contents for TV-VS1

Reviews:

Related manuals for TV-VS1

Brands by name

Popular brands