- 37 -
Deny
IPv4:
Assign a range of IP addresses that are blocked to access
the device by entering the
Start IP address
and
End IP address
options. When you are finished, click
Add
to save the range
setting. You can repeat the action to assign multiple ranges for
the device.
IPv6:
Enter the
IP Address
that is not allowed to access the
device.
For example, when you enter
192.168.10.50/192.168.10.80
in
Start/End
IP Address
of
Accept
> IPv4
, the user whose IP address located within
192.168.10.50 ~ 192.168.10.80
will be allowed to access the device. On
the other hand, if you enter the IP range in
Start/End IP Address
of
Deny
> IPv4
, the user whose IP address located within the range will not be
allowed to access the device.
Summary of Contents for TV-VS1
