![background image](http://html.mh-extra.com/html/trendnet/tv-vs1/tv-vs1_user-manual_1156782013.webp)
- 12 -
2.2 Connecting the Cables
1.
Connecting the device to power source
Use the provided power adapter to connect the device to the power
source, such as the electrical outlet on the wall, and connect the
other end to the device. You can verify the power status from the
Power LED on the rear panel of the device.
2.
Connecting the device to LAN
Use the provided Network cable to connect the device to your local
area network (LAN). Once connected, the Link LED starts flashing
green light.
3.
Connecting the camera to the device
Connects a CCTV analog camera to the Video Encoder so that the
Video Encoder can work within your
surveillance solution. To
connect the camera, plug one end of the BNC cable to the Video in
connector of the device and the other end to the Video out
connector of the camera.
Summary of Contents for TV-VS1
