TRENDnet TV-IP200, User Manual, Page: 45 / 135

44
Click on “Tools” in the system administration menu bar and the
Tools screen will appear as illustrated below:
Reset:
The Reset command restarts the
Internet Camera
just like
turning the device off and on and saved settings are retained. The
Reset panel contains the message “Do you really want to reset
this device?” and a YES button. If you do not want to reset the
Internet Camera
, exit the panel without clicking YES, otherwise,
click on the “YES” icon and the reset process will initiate.
Factory Reset:
A factory reset restarts the
Internet Camera
and returns all of its
settings to their default values. The Factory Reset panel contains
the message “Do you really want to factory reset this device?”
and a YES button. If you do not want to carry out a factory reset
command, exit the panel without clicking YES, otherwise click
on the
“YES” icon and factory reset will be initiated.
Note:
The Network must be reconfigured after a Factory Reset.
Once the configuration is completed click on “Home” to return to
the Welcome screen and select the desired Viewing Image either
Click on “Home”
to return to
Welcome Screen