TRENDnet TV-IP200, User Manual, Page: 17 / 135

16
DC Power Connector
The DC power input connector is located on the Internet
Camera’s rear panel and is labeled DC 5V with a single jack
socket to supply power to the Internet Camera. Power will be
generated when the power supply is connected to a wall outlet.
Reset Button
Reset will be initiated when the reset button is pressed once and
Power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to
light up. Release the reset button and the Power LED will begin
to flash indicating the Internet Camera is changing to factory
reset. When factory reset is completed the IP address will return
to the default setting as 192.168.0.20.
I/O Connector
There are four I/O connectors, two for input and two for output
situated on the rear panel. The I/O connectors provide the
physical interface to send and receive digital signals to a variety
of external alarm devices.
Please refer to the User’s Guide
appendix for detailed information .