TRENDnet TV-IP200, User Manual, Page: 31 / 135

30
There are two options to select from the IP Assignment either
Manually Assign or Assign Automatically Using .
Manually Assign
You can click “Manually Assign” and directly enter the IP
address.
The default settings are as follows:
??
Default IP – 192.168.0.20
??
Subnet Mask – 255.255.255.0
??
Default Gateway – 0.0.0.0
Assign Automatically Using
If your network is using RARP, BOOTP or DHCP server you can
click
“Assign Automatically Using” and click on “RARP” ,
“BOOTP” or “DHCP” . Under this setting the
Internet Camera
will automatically assign an IP address from RARP, BOOTP or
DHCP server. Each time the
Internet Camera
starts up be sure
the RARP, BOOTP or DHCP server is setup as assign a static IP
to your
Internet Camera
.
If your application requires direct connection from an ADSL
modem through the
Internet Camera
’s RJ-45 LAN port and you
also have an ISP PPPoE account. Click on “PPPoE” option and
enter the Service Name, User ID and Password into the respective
fields.
The Internet Camera
will get an IP address from the ISP each
time the
Internet Camera
starts up.