TRENDnet TV-IP200 User Manual Download Page 15 | Manualshive

Page: 15 / 135

TRENDnet TV-IP200 User Manual Download Page 15

14

Power LED

The Power LED is positioned on the right side of the Internet
Camera’s lens while facing the Internet Camera.

Steady blue confirms the Internet Camera is powered on.

Note:

There are three settings for the Power LED to control the light
illumination for monitoring purpose from Normal / Off / Dummy.

Please refer to the Web Configuration sectio n for detailed
information and usage

.

LAN LED

The LAN LED is positioned on the far right side of the Internet
Camera’s lens while facing the Internet Camera. It is located
right of the Power LED

Steady orange confirms good connection to LAN connectivity.

Dependent on the data traffic the LED will begin to flash to
indicate the Internet Camera is receiving/transceiving from/to the
LAN or network.

Note

:

There are three settings for the LAN LED to control the light
illumination for monitoring purpose from Normal / Off / Dummy.

Please refer to the Web Configuration section for detailed
information and usage.

«
...
13
14
15
16
17
...
»

Summary of Contents for TV-IP200








































































































































Reviews:

No comments