TRENDnet TPE-TG44ES, User Manual

Page: 15 / 30

© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-TG44ES
13
Rate Limiting
Set Per Port Rate Limiting
Rate Limiting
The switch allows you to set a rate or bandwidth limit per port both transmitting and
receiving.
1. Log into your switch management page (see “ Access your switch management page ”
on page 6).
2. Click on Rate Limiting.
3. Review the settings for each port. Click Apply to save the settings.

Port – Indicates the port number.

Ingress rate – Click the drop-down list to select the rate or bandwidth limit for
received on a specific port.

Egress rate – Click the drop-down list to select the rate or bandwidth limit for
transmitted from a specific port.
Loopback Detection & Prevention
Enable loopback prevention
Loopback Prevention
The loopback detection and prevention feature allows the switch to detect and prevent
disruption from loops that occur on other switches directly connected to your switch.
Ex. A loop occurs on another switch that is connected to your switch on port 5. If
loopback detection and prevention is enabled on your switch, the switch will detect a
loop occurrence on port 5 and disable it until the loop issue is resolved.
1. Log into your switch management page (see “ Access your switch management page ”
on page 6).
2. Click on Loopback Prevention.
3. To enable loopback detection and prevention on all ports, click the drop-down list and
select Loopback Prevention. Click Apply to save changes.