·
In
Infrastructure
mode, make sure the same
Service Set Identifier
(SSID)
is specified on the settings for the wireless clients and access
points. The
SSID
factory default setting for this adapter is
default.
(Double-click on the WLAN icon in the taskbar. The
Link Info
screen
will display the SSID setting.)
·
In
Ad-Hoc
mode, all wireless clients will need to have the same
SSID
. Please note that it might be necessary to set up one client to
establish a
BSS (Basic Service Set)
and wait briefly before setting
up other clients. This prevents several clients from trying to establish
a
BSS
at the same time, which can result in multiple singular
BSSs
being established, rather than a single
BSS
with multiple clients
associated to it.
·
Check that the
Network Connection
for the wireless client is
configured properly. Select
AP (Infrastructure)
when connecting to
an access point and select
Ad-Hoc mode
when connecting without
an access point. Double-click on the
WLAN
icon
in the taskbar >
click on
Configuration
to change the settings for the wireless
adapter.
·
If
Encryption
is enabled, make sure that the correct encryption keys
are entered on both the TEW-303PI and other wireless devices.
Double-click on the
WLAN
icon in the taskbar > click
Encryption
.
Check to see that the key selected is set to the same key as other
devices on the network.
24
